How To Set Up Eno Hammock

Download Article

Download Article

Eagle'south Nest Outfitters (ENO) is a popular make of hammocks used for leisure and sleeping, while camping or in the comfort of your abode or one thousand. The SingleNest, DoubleNest, and DoubleDeluxe hammock models all agree up to 400 pounds and are fabricated of flexible nylon taffeta that is lightweight, comfortable, and quick-drying. The way yous append your hammock will depend on how and where you want to use information technology. Learn how to hang your ENO hammock safely wherever you are.

1. 1

   Find two trees 10-12 feet autonomously. Look for two copse that are about 10-12 feet apart to hang your hammock when you're outdoors. The copse should be alive and healthy with solid bark and no overhead hazards.

   • Choose copse that are at least a foot (12 inches) in diameter to ensure stability.
   • Do not employ trees for mounting your hammock if they are closer together than 10 anxiety, as your hammock may be too low to the ground when weight is applied.
   • Check with the administrators of the park or natural area yous're in before hanging up your hammock. Some have rules and regulations regarding hanging hammocks, as it can affect the health of trees.

2. 2

   Wrap SlapStraps on each tree. Accept out your set of ii ENO SlapStraps and attach one to each of your mounting copse. The straps should wrap effectually a wide part of the trunk, about five feet from the ground.

   • To adhere a SlapStrap, wrap information technology around the trunk of a tree and concord an end in each hand. Thread one end through the loop on the other end, then pull until the strap is tight around the tree trunk. Do this with both straps/copse.
   • You tin use your own rope or strap organization instead of ENO's SlapStraps, but annotation that they may be more hard to put up or less safe.

   Advert

3. 3

   Accept extra precautions to protect trees. Ensure you are using SlapStraps properly every bit discussed here to avoid whatsoever negative touch on the trees you utilise to hang the hammock. Endeavour placing sticks in between the strap and the tree to lessen friction.

   • Gather a handful of sticks from the ground in your surrounding area. They should be roughly the length of your forearm and of the same bore every bit 1 some other. Note that you need their diameter to be thick enough to stick out from the bark of the tree slightly.
   • Hang your SlapStraps, and then place the sticks between the strap and the tree, all the way effectually, almost a hand's width apart between each one.^[ane]

4. iv

   Attach your hammock to the straps. Attach your ENO hammock between the trees by using the provided carabiners on each end of the hammock. Slip the carabiner into one of the five loops provided.

   • Your ENO hammock comes with an aluminum wiregate carabiner at either end for attachment to straps. Push to open up the gate to put information technology on i of the loops, then brand sure the carabiner is fully airtight around it.
   • The five adjustment loops bachelor make it easy to adjust the summit of the hammock. Simply choose a higher or lower loop depending on how far you want your hammock to be from the ground (recommended 18 inches or lower when occupied).

5. 5

   Test and adapt the hammock. Slowly put weight on your hammock once it has been attached to the straps on the copse. Sit and then lay downwardly fully in the hammock to make up one's mind if it is at the right height.

   • If y'all touch the ground at all while in the hammock, it should be higher. Secure the carabiners to a higher loop on each SlapStrap. If you have no more than available loops, y'all demand to select trees that are farther apart.
   • If it'southward difficult to become into your hammock to begin with, information technology should be lower. Attach the carabiners to a lower loop on the SlapStraps. If you take no more lower loops, choose trees that are closer together, or buy Atlas or Atlas XL straps.
   • The ends of your hammock should be placed into loops so that they are level, or with a slight difference that'south comfortable to yous while you're lying downwardly in it (for example, you may like to take your head slightly higher).^[ii]

Advertisement

1. 1

   Find two solid copse for mounting. Hang your hammock between two trees approximately 10-12 feet apart. The trees should be live with sturdy trunks of at least 12 inches diameter and no overhead hazards.

   • The Atlas and Atlas XL can be used to hang hammocks between copse that are farther apart due to the extra adjustment loops. However, a distance of 10-12 feet betwixt the trees is generally ideal. Don't use trees closer than 10 feet apart.
   • Check with the administrators of the park or natural area you wish y'all hang your hammock in first. They may accept rules or regulations about hammocks to protect the safety of trees.

2. ii

   Wrap Atlas straps around the trees. Use the ii straps that come with ENO'due south Atlas system to secure the hammock to the trees. Wrap a strap around each tree most v feet from the ground.

   • To secure an Atlas strap, pull the multi-adjustment end (with minor loops at intervals along the strap) through the cease that has the label and a single larger loop. Pull it until the strap is tight around the tree trunk.
   • You are welcome to use other straps or ropes to hang an ENO hammock in this way, only information technology may not be every bit easy, safe, or adjustable.

3. three

   Use sticks for actress tree protection. Ensure you are installing the Atlas straps properly as discussed here to avert any damage to the trees you're using to hang your hammock. Place sticks in betwixt the strap and the tree to lessen friction as an extra precaution.

   • Get together a handful of sticks from the ground in your surrounding area. They should each be about the same bore, and about the length of your forearm. Notation that you need the bore to be thick plenty that the sticks will protrude out from the bark of the tree slightly.
   • Hang your Atlas straps normally, and then place the sticks betwixt the strap and the tree, all the mode effectually the trunk, near a paw's width autonomously between each one.^[3]

4. four

   Secure the hammock to the straps and adapt. Adhere your hammock to the bachelor loops on each Atlas strap with the carabiners at either end. Conform the hammock to your desired height past changing which loops the carabiners fit into.

   • Atlas straps take a combined full of xxx adjustment loops, while the Atlas Forty has an boosted 10 loops and 54 inches of length for maximum aligning options.
   • Your ENO hammock comes with two aluminum wiregate carabiners at the ends. Visually bank check that they are airtight, and listen for a "click" before yous put weight on your hammock.
   • Slowly sit and lay on your hammock to exam the meridian and evenness. Move each carabiner to a higher loop if your hammock is too low to the footing, a lower loop if your hammock is too high, or 1 or the other carabiner to a unlike loop if the two sides are uneven.

5. v

   Use Helios straps for more lightweight flexibility. Endeavour out the ENO Helios straps if yous demand an extra lightweight pattern for backpacking, or yous have a tricky space for hanging. Helios uses a coffin splice pattern for extra adjustability.

   • Secure the straps to each tree like you lot would with SlapStraps or Atlas, except with Helios you will pull the thin terminate made with stiff Dyneema string through the end with a thicker polyester strap.
   • Sideslip each hammock carabiner through the pocket-size loop terminate of the cord that'due south labeled "Identify hammock here." And so pull the long end of the cord to adjust the hammock college, or pull on the cord between your hammock and the tree to suit information technology lower.^[four]
   • Annotation that the Helios straps are designed to agree 300 pounds, rather than the 400 pound maximum that other ENO straps are designed for.

Ad

1. 1

   Find two sturdy indoor or outdoor structures for the hanging kit. Hang a hammock more permanently indoors or outdoors in an area with a lack of suitable copse. Use a hanging kit to mountain the hammock between any ii structures that incorporate wooden studs or other sturdy wood fabric.

   • Detect a infinite with a distance of well-nigh 112 inches between your two structures, where you tin attach the anchors for the hammock about 50 inches off the footing. Lay your hammock downward on the floor betwixt the structures for reference, or hold it up in the space to make sure.
   • Note that the hanging kit from ENO is designed for use with strong wooden structures, like the wooden studs in a abode wall. If you wish to hang your hammock from other structures, you should cull different screws and fittings designed for that material.
   • Never install the hanging kit into trees, as it can severely damage them.

2. 2

   Find studs for the hanging kit anchors. If you're hanging your hammock from two walls, you demand to locate wooden studs for the hardware. Use a hammer and nail to assistance you discover studs, or an electronic stud finder if you have one.

   • With a hammer, tap gently along the wall and place your hand only in a higher place where you're tapping to feel the vibration of the impact. When you tap where there is a stud, the vibration will exist much less and the sound volition exist a ho-hum thud.
   • You tin can also use features in a room to make up one's mind where studs are. Either edge of a window or door frame will always be on studs, and you can measure out 16" (typically) away from the heart of whatever known stud to find the next ane.
   • To test any location you believe to have a stud, hammer a thin nail into the wall. If information technology meets resistance nearly ½ inch into it, there is a stud at that place. If it meets no resistance, there is merely hollow sheetrock, which will NOT be suitable for holding up your hammock.

3. 3

   Marking and drill into the wall. Use a pencil to mark where you want your hammock to hang from each wall (about l inches from the floor is recommended). Then drill a hole in the middle of each stud with a 5/16" drill bit.

   • Make sure you will exist drilling into the center of a stud by making several more exam holes close together on the wall. When you find the border of the stud, measure ¾ inch in to mark the center, as a standard stud is 1 ½" wide.
   • Using a drill with 5/16" drill bit, drill direct into the stud for 3 inches.

4. four

   Adhere the lag screws, anchors, and steel carabiners. Use a ix/16" wrench or a socket commuter to tighten the included hardware into the wall. You will tighten down an anchor with a lag screw into each of your drilled holes.

   • Tighten the lag screw until the anchor is snug against the wall, slightly compressing the sheetrock without damaging it.
   • Supersede the aluminum carabiners that come with your ENO hammock with the heavy-duty steel carabiners provided with the hanging kit. Then adhere the carabiners directly to the anchors to hang your hammock.

5. 5

   Opt for a hammock stand up. Use a hammock correspond your hammock if y'all want a very unproblematic procedure for hanging. Opt for a stand if you don't have options for installing the hanging kit or using straps on trees, such as in an open indoor or outdoor area.

   • Purchase a hammock stand up from ENO for easiest setup. Choose from a standard solo hammock stand, one that can hold three unlike hammocks, or a Roadie stand that can be held up by the wheels of a auto for road trips.
   • You tin can use other hammock stands for ENO hammocks if you wish, every bit long as the frame is near 10 feet long.

Advertisement

Ask a Question

200 characters left

Include your electronic mail address to get a message when this question is answered.

Submit

Advertisement

Video

• Purchase the Atlas EXT to add more length to whatever of the other strap systems.

Cheers for submitting a tip for review!

Advertisement

• Get assist from a qualified professional person or person experienced with hanging hammocks if you are unsure most whatever of these methods, especially installing the hanging kit into walls.

Advertisement

Near This Commodity

Article Summary X

To hang an Hawkeye'southward Nest Outfitters hammock, look for 2 copse that are 10-12 feet apart and at to the lowest degree a pes in diameter. Wrap your straps effectually each tree about v feet off the ground. Put a few sticks vertically between each tree and its strap to protect the tree. Then, attach your hammock to the straps using its carabiners. Examination the hammock by slowly putting your weight on it. If the hammock's slightly likewise loftier or low, move the carabiners to different loops on the straps. For more tips, including how to permanently hang a hammock using a hanging kit, read on!

Did this summary help you?

Thank you to all authors for creating a folio that has been read 257,442 times.

Did this article assist y'all?

Source: https://www.wikihow.com/Hang-an-ENO-Hammock

Share this post